Shenzhen Jia Ronghua Technology Co., Ltd.

Service Hotline400 665 5080

中文
Mechatronics Water Meter
  • Mechatronics remote water meter

Mechatronics remote water meter

Type:Mechatronics Water Meter

Introduction:This electromechanical synchronous sensor can be widely used in ordinary wet water meter, does not change the traditional wet water meter structure, does not affect the traditional wet water meter measurement accuracy and sensitivity, water meter calibration c...

Service Hotline:400 665 5080

PurchaseOnline consultation

  • Description
  • Parameter
PRODUCT BRIEF
This electromechanical synchronous sensor can be widely used in ordinary wet water meter, does not change the traditional wet water meter structure, does not affect the traditional wet water meter measurement accuracy and sensitivity, water meter calibration cycle only need to replace the water meter base table; Decode code decoding technology Can accurately read the mechanical position of the code disc data, non-traditional photoelectric read water wheel position data, there is no word round 0 and 9 carry problem, there is no critical state and fuzzy state, the electronic components installed in a separate sealed chamber , Waterproof performance of IP68 level, no light interference problems, the production process is extremely simple, more suitable for large-scale and standardized production.

Product features
Decimal code decoder technology, there is no carry problem between 0 and 9 No word round display, free from external light interference, more accurate readings, measurement accuracy of 0.1m3 sealed structure, not affected by the impact of wet environment, water resistance to achieve IP68 grade split design, installation and maintenance easier and simple After the calibration cycle to replace the water meter base table.

Technical Parameters
Dimensions: 116 * 90 * 67.7mm
Communication: M-BUS bus
Communication speed: 1200BPS / 2400BPS / 4800BPS / 9600BPS
Working voltage: DC36V
Bus pin ESD protection over 10KV
Working current: quiescent current ≤1.4MA
Working current: ≤10MA
Working environment: Temperature: -5 ℃ ~ 80 ℃ Humidity: 0% ~ 95% RH
Communication transmission distance: 300M

Order:Mechatronics remote water meter

  • Name
  • PhoneNumber
  • Email
  • VerifyCode